ATEN ES0152 User Manual page 110

KVM over IP User Manual
2. Select port that you want to display the UDLD Status.
3. If you want to auto-refresh the information then you need to evoke the
"Auto refresh".
4. Click "Refresh" to refresh the Loop Protection Status.
 Parameter description:
UDLD port status
UDLD Admin State:
The current port state of the logical port, Enabled if any of
state(Normal,Aggressive) is Enabled.
Device ID(local): The ID of Device.
Device Name(local): Name of the Device.
Bidirectional State: The current state of the port.
Neighbor Status
Port:
The current port of neighbor device.
Device ID:
The current ID of neighbor device.
Link Status:
The current link status of neighbor port.
Device Name:
Name of the neighbor Device.
 Buttons
Auto-refresh:
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refresh:
Click to refresh the page immediately.
96