Table of Contents
Advertisement
Chapter 16. Event Notification
Copper Port:
Copper port number.
Link Status:
The status of the cable.
10M: Cable is link up and correct. Speed is 10Mbps
100M: Cable is link up and correct. Speed is 100Mbps
1G: Cable is link up and correct. Speed is 1Gbps
Link Down: Link down or cable is not correct.
Test Result:
Test Result of the cable.
OK: Correctly terminated pair
Abnormal: Incorrectly terminated pair or link down
Length:
The length (in meters) of the cable pair. The resolution is 3 meters. When Link
Status is shown as follow, the length has different definition.
1G: The length is the minimum value of 4-pair.
10M/100M: The length is the minimum value of 2-pair.
Link Down: The length is the minimum value of non-zero of 4-pair.
Button
Start:
Start to cable diagnostics the port that you selected.
413
Advertisement
Table of Contents
