Table of Contents
Advertisement
Chapter 10. Multicast
visited, the web page will show the first 20 entries from the beginning of the
MLD SFM Information Table.
The "Start from VLAN", and "group" input fields allow the user to select the
starting point in the MLD SFM Information Table. Clicking the Refresh button
will update the displayed table starting from that or the closest next MLD SFM
Information Table match. In addition, the two input fields will - upon a Refresh
button click - assume the value of the first displayed entry, allowing for
continuous refresh with the same start address.
The Next Page will use the last entry of the currently displayed table as a basis
for the next lookup. When the end is reached the text "No more entries" is
shown in the displayed table. Use the First Page button to start over.
VLAN ID:
VLAN ID of the group.
Group:
IP Multicast Group address.
Port:
Switch port number.
Mode:
Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
Source Address:
IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128.
Type:
Indicates the Type. It can be either Allow or Deny.
Hardware Filter/Switch:
Indicates whether data plane destined to the specific group address from the
source IPv6 address could be handled by chip or not.
233
Advertisement
Table of Contents
