Table of Contents
Advertisement
KVM over IP User Manual
Timeout is the number of seconds, in the range 1 to 1000, to wait for a reply
from a TACACS+ server before it is considered to be dead.
Deadtime:
Deadtime, which can be set to a number between 0 to 1440 minutes, is the
period during which the switch will not send new requests to a server that has
failed to respond to a previous request. This will stop the switch from
continually trying to contact a server that it has already determined as dead.
Setting the Deadtime to a value greater than 0 (zero) will enable this feature,
but only if more than one server has been configured.
Key:
The secret key - up to 63 characters long - shared between the TACACS+
server and the switch.
Server Configuration
The table has one row for each TACACS+ server and a number of columns,
which are:
Delete:
To delete a TACACS+ server entry, check this box. The entry will be deleted
during the next Save.
Hostname:
The IP address or hostname of the TACACS+ server.
Port:
The TCP port to use on the TACACS+ server for authentication.
Timeout:
This optional setting overrides the global timeout value. Leaving it blank will
use the global timeout value.
Key:
This optional setting overrides the global key. Leaving it blank will use the
global key.
Buttons
Delete:
This button can be used to undo the addition of the new server.
Add New Server:
328
Advertisement
Table of Contents
