Table of Contents
Advertisement
Chapter 12. Security
Parameter description:
User Name:
The name identifying the user. The field can be input 31 characters. This is also
a link to Add/Edit User.
Password:
To type the password. The field can be input 31 characters, and the allowed
content is the ASCII characters from 32 to 126.
Password (again):
To type the password again. You must type the same password again in the
field.
Privilege Level:
The privilege level of the user. The allowed range is 0 to 15. If the privilege
level value is 15, it can access all groups, i.e. that is granted the fully control of
the device. But others value need to refer to each group privilege level. User's
privilege should be same or greater than the group privilege level to have the
access of that group. By default setting, most groups privilege level 5 has the
read-only access and privilege level 10 has the read-write access. And the
system maintenance (software upload, factory defaults and etc.) need user
privilege level 15. Generally, the privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account and
privilege level 5 for a guest account.
Buttons
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Cancel:
Click to undo any changes made locally and return to the Users.
Delete User:
Delete the current user. This button is not available for new configurations
(Add new user).
269
Advertisement
Table of Contents
