KVM over IP User Manual
Server Configuration
The table has one row for each RADIUS server and a number of columns,
which are:
Hostname:
The IP address or hostname of the RADIUS server.
Auth Port:
The UDP port to use on the RADIUS server for authentication.
Acct Port:
The UDP port to use on the RADIUS server for accounting.
Timeout:
This optional setting overrides the global timeout value. Leaving it blank will
use the global timeout value.
Retransmit:
This optional setting overrides the global retransmit value. Leaving it blank
will use the global retransmit value.
Key:
This optional setting overrides the global key. Leaving it blank will use the
global key.
Buttons
Delete:
To delete a RADIUS server entry, check this box. The entry will be deleted
during the next Save.
Add New Entry:
Click to add a new RADIUS server. An empty row is added to the table, and
the RADIUS server can be configured as needed. Up to 5 servers are supported.
The button can be used to undo the addition of the new server.
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
318