ATEN ES0152 User Manual page 102

KVM over IP User Manual
Web Interface
To display the LACP Port status in the web interface:
1. Click Port Management, Link Aggregation and Port Status.
2. If you want to auto-refresh the information then you need to evoke the
"Auto-refresh".
3. Click "Refresh" to refresh the LACP Port Status.
 Parameter description:
Port:
The switch port number.
LACP:
'Yes' means that LACP is enabled and the port link is up. 'No' means that LACP
is not enabled or that the port link is down. 'Backup' means that the port could
not join the aggregation group but will join if other port leaves. Meanwhile it's
LACP status is disabled.
Key:
The key assigned to this port. Only ports with the same key can aggregate
together.
Aggr ID:
The Aggregation ID assigned to this aggregation group. IDs 1 and 2 are
GLAGs while IDs 3-14 are LLAGs.
88