Table of Contents
Advertisement
Chapter 7. Quality of Server (QoS)
Shapers – Qn:
Shows disabled or actual queue shaper rate - e.g. "800 Mbps".
Shapers – Port:
Shows disabled or actual port shaper rate - e.g. "800 Mbps".
Scheduler Mode:
Controls how many of the queues are scheduled as strict and how many are
scheduled as weighted on this switch port.
Queue Shaper Enable:
Controls whether the queue shaper is enabled for this queue on this switch port.
Queue Shaper Rate:
Controls the rate for the queue shaper. This value is restricted to 100-
13107100 when "Unit" is kbps, and 1-13107 when "Unit" is Mbps.The rate is
internally rounded up to the nearest value supported by the queue shaper.
Queue Shaper Unit:
Controls the unit of measure for the queue shaper rate as kbps or Mbps.
Queue Shaper Rate-type:
The rate type of the queue shaper. The allowed values are:
Line: Specify that this shaper operates on line rate.
Data: Specify that this shaper operates on data rate.
Queue Scheduler Weight:
Controls the weight for this queue. This value is restricted to 1-100. This
parameter is only shown if "Scheduler Mode" is set to "Weighted".
Queue Scheduler Percent:
Shows the weight in percent for this queue. This parameter is only shown if
"Scheduler Mode" is set to "Weighted".
Port Shaper Enable:
Controls whether the port shaper is enabled for this switch port.
Port Shaper Rate:
Controls the rate for the port shaper. This value is restricted to 100-
13107100 when "Unit" is kbps, and 1-13107 when "Unit" is Mbps.The rate is
internally rounded up to the nearest value supported by the port shaper.
155
Advertisement
Table of Contents
