Table of Contents
Advertisement
PoE Reboot: Click Reboot Action Icon to reboot the device
remotely so as recover the device back to its normal operation.
Icon with blank node: When DMS switch detects more than two
IP devices from the same port, switch can't resolve this IP device's
layout, instead, it will show a blank node to present this situation. User
can use "Parent Node" function to adjust layout in Dashboard.
2. Notification Console: It displays alarms and logs triggered by events.
3. Monitor Console: It displays the traffics for device health check
purpose.
For each IP device except DMS switches, User can set a threshold of
throughput for IP devices, and get notification when throughput is
lower or higher than settings.
If both values are "0", it means the function is disabled.
Polling interval is 1 second, when the page is closed, the Polling
interval will change to around 5 seconds.
Chapter 18. Device Management System
445
Advertisement
Table of Contents
