Table of Contents
Advertisement
KVM over IP User Manual
PoE Schedule:
Disable or Select the PoE Schedule profile.
Priority:
The Priority represents the ports priority. There are three levels of power
priority named Low, High and Critical.
The priority is used in the case where the remote devices requires more power
than the power supply can deliver. In this case the port with the lowest priority
will be turn off starting from the port with the highest port number.
Maximum Power [W]:
The Maximum Power value contains a numerical value that indicates the
maximum power in watts that can be delivered to a remote device.
The maximum allowed value is 30 W.
Delay Mode:
Turn on / off the power delay function.
Enabled: Enable POE Power Delay.
Disabled: Disable POE Power Delay.
Delay Time(0~300sec):
When rebooting, the PoE port will start to provide power to the PD when it out
of delay time. default: 0, range: 0-300 sec.
Buttons
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
102
Advertisement
Table of Contents
