ATEN ES0152 User Manual page 263

3. Specify Entry Name, Start Address and End Address.
4. Click the apply to save the setting.
5. If you want to cancel the setting then you need to click the Reset button. It
will revert to previously saved values.
6. Click "Refresh" to refresh an entry of the MLD Snooping Group
Information.
7. Click First Entry/Next Entry to change Entry.
 Parameter description:
Entry Name:
The name used for indexing the address entry table.
Each entry has the unique name which is composed of at maximum 16
alphabetic and numeric characters.
Start Address:
The starting IPv4/IPv6 Multicast Group Address that will be used as an address
range.
End Address:
The ending IPv4/IPv6 Multicast Group Address that will be used as an address
range.
 Buttons
Add New Address (Range) Entry:
Click to add new address range. Specify the name and configure the addresses.
Click "Apply"
Delete:
Check to delete the entry.
The designated entry will be deleted during the next save.
Chapter 10. Multicast
249