ATEN ES0152 User Manual page 140

KVM over IP User Manual
 Parameter description:
MAC Address:
Indicates the MAC address.
VLAN ID:
Indicates the VLAN ID.
Port Members:
A row of check boxes for each port is displayed for each MAC to VLAN ID
mapping entry. To include a port in the mapping, check the box. To remove or
exclude the port from the mapping, make sure the box is unchecked. By
default, no ports are members, and all boxes are unchecked.
 Buttons
Adding New Entry:
Click to add a new MAC-based VLAN entry. An empty row is added to the
table, and the MAC-based VLAN entry can be configured as needed. Any
unicast MAC address can be configured for the MAC-based VLAN entry. No
broadcast or multicast MAC addresses are allowed. Legal values for a VLAN
ID are 1 through 4095.
Delete:
To delete a MAC-based VLAN entry, check this box and press apply. The
entry will be deleted on the selected switch in the stack.
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Buttons
Auto-refresh:
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refresh:
126