Table of Contents
Advertisement
KVM over IP User Manual
Web Interface
To display the IGMP SFM Information in the web interface:
1. Click Multicast, IGMP Snooping and IGMP SFM Information.
2. If you want to auto-refresh the information then you need to evoke the
"Auto-refresh".
3. Click "Refresh" to refresh an entry of the IGMP Snooping Groups
Information.
4. Click First/Next Page to change page.
Parameter description:
Navigating the IGMP SFM Information Table
Each page shows up to 99 entries from the IGMP SFM Information table,
default being 20, selected through the "entries per page" input field. When first
visited, the web page will show the first 20 entries from the beginning of the
IGMP SFM Information Table.
The "Start from VLAN", and "group" input fields allow the user to select the
starting point in the IGMP SFM Information Table. Clicking the Refresh
button will update the displayed table starting from that or the closest next
IGMP SFM Information Table match. In addition, the two input fields will -
upon a Refresh button click - assume the value of the first displayed entry,
allowing for continuous refresh with the same start address.
220
Advertisement
Table of Contents
