Table of Contents
Advertisement
Chapter 6. VLAN Management
Parameter description:
Delete:
To delete a private VLAN entry, check this box. The entry will be deleted
during the next apply.
Private VLAN ID:
Indicates the ID of this particular private VLAN.
Port Members:
A row of check boxes for each port is displayed for each private VLAN ID. To
include a port in a Private VLAN, check the box. To remove or exclude the port
from the Private VLAN, make sure the box is unchecked. By default, no ports
are members, and all boxes are unchecked.
Add New Private VLAN:
Click to add a new private VLAN ID. An empty row is added to the table, and
the private VLAN can be configured as needed. The allowed range for a private
VLAN ID is the same as the switch port number range. Any values outside this
range are not accepted, and a warning message appears. Click "OK" to discard
the incorrect entry, or click "Cancel" to return to the editing and make a
correction.
The Private VLAN is enabled when you click "Apply".
The button can be used to undo the addition of new Private VLANs.
Buttons
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
139
Advertisement
Table of Contents
