ATEN ES0152 User Manual page 243

Chapter 10. Multicast
Querier Version:
Working Querier Version currently.
Host Version:
Working Host Version currently.
Querier Status:
Show the Querier status is "ACTIVE" or "IDLE".
"DISABLE" denotes the specific interface is administratively disabled.
Queries Transmitted:
The number of Transmitted Queries.
Queries Received:
The number of Received Queries.
V1 Reports Received:
The number of Received V1 Reports.
V2 Reports Received:
The number of Received V2 Reports.
V1 Leaves Received:
The number of Received V1 Leaves.
Router Port
Display which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or MLD querier.
Static denotes the specific port is configured to be a router port.
Dynamic denotes the specific port is learnt to be a router port.
Both denote the specific port is configured or learnt to be a router port.
Port:
Switch port number.
Status:
Indicate whether specific port is a router port or not.
 Buttons
229