KVM over IP User Manual
There are two modes for configuring how the Clock Source from. Select
"Local Settings": Clock Source from Local Time. Select "NTP Server" : Clock
Source from NTP Server.
System Date:
Show the current time of the system. The year of system date limits between
2000 and 2037.
Time Zone Configuration
Time Zone:
Lists various Time Zones worldwide. Select appropriate Time Zone from the
drop down and click Apply to set.
Acronym:
User can set the acronym of the time zone. This is a User configurable acronym
to identify the time zone. (Range: Up to 16 characters)
Daylight Saving Time Configuration
Daylight Saving Time:
This is used to set the clock forward or backward according to the
configurations set below for a defined Daylight Saving Time duration. Select
'Disable' to disable the Daylight Saving Time configuration. Select 'Recurring'
and configure the Daylight Saving Time duration to repeat the configuration
every year. Select 'Non-Recurring' and configure the Daylight Saving Time
duration for single time configuration. (Default: Disabled).
Recurring Configuration
Start time settings:
Week - Select the starting week number.
Day - Select the starting day.
Month - Select the starting month.
Hours - Select the starting hour.
Minutes - Select the starting minute.
End time settings:
Week - Select the ending week number.
Day - Select the ending day.
Month - Select the ending month.
34