Table of Contents
Advertisement
Chapter 13. Access Control
Host: Target IP filter is set to Host. Specify the target IP address in the Target
IP Address field that appears. Network: Target IP filter is set to Network.
Specify the target IP address and target IP mask in the Target IP Address and
Target IP Mask fields that appear.
Target IP Address:
When "Host" or "Network" is selected for the target IP filter, you can enter a
specific target IP address in dotted decimal notation.
Target IP Mask:
When "Network" is selected for the target IP filter, you can enter a specific
target IP mask in dotted decimal notation.
ARP Sender MAC Match:
Specify whether frames can hit the action according to their sender hardware
address field (SHA) settings.
0: ARP frames where SHA is not equal to the SMAC address.
1: ARP frames where SHA is equal to the SMAC address.
Any: Any value is allowed ("don't-care").
RARP Target MAC Match:
Specify whether frames can hit the action according to their target hardware
address field (THA) settings.
0: RARP frames where THA is not equal to the target MAC address.
1: RARP frames where THA is equal to the target MAC address.
Any: Any value is allowed ("don't-care").
IP/Ethernet Length:
Specify whether frames can hit the action according to their ARP/RARP
hardware address length (HLN) and protocol address length (PLN) settings.
0: ARP/RARP frames where the HLN is not equal to Ethernet (0x06) or the
(PLN) is not equal to IPv4 (0x04).
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the
(PLN) is equal to IPv4 (0x04).
Any: Any value is allowed ("don't-care").
Ethernet:
345
Advertisement
Table of Contents
