Table of Contents
Advertisement
the same server is counted as a retransmit as well as a timeout. A send to a
different server is counted as a Request as well as a timeout.
IP Address:
IP address and UDP port for the accounting server in question.
State:
Shows the state of the server. It takes one of the following values:
Disabled:
The selected server is disabled.
Not Ready:
The server is enabled, but IP communication is not yet up and running.
Ready:
The server is enabled, IP communication is up and running, and the
RADIUS module is ready to accept accounting attempts.
Dead (X seconds left):
Accounting attempts were made to this server, but it did not reply within
the configured timeout. The server has temporarily been disabled, but will
get re-enabled when the dead-time expires. The number of seconds left
before this occurs is displayed in parentheses. This state is only reachable
when more than one server is enabled.
Round-Trip Time:
The time interval (measured in milliseconds) between the most recent
Response and the Request that matched it from the RADIUS accounting server.
The granularity of this measurement is 100 ms. A value of 0 ms indicates that
there hasn't been round-trip communication with the server yet.
Buttons
Auto-refresh:
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refresh:
Click to refresh the page immediately.
Chapter 12. Security
325
Advertisement
Table of Contents
