Chapter 16. Event Notification
Parameter description:
Monitor Destination Port:
Port to output the mirrored traffic. Also known as the mirror port. Frames from
ports that have either source (rx) or destination (tx) mirroring enabled are
mirrored on this port.
Mirror Source Port Configuration
The following table is used for Rx and Tx enabling.
Port:
The logical port for the settings contained in the same row.
Mode:
Select mirror mode.
Rx only: Frames received on this port are mirrored on the mirror port. Frames
transmitted are not mirrored.
Tx only: Frames transmitted on this port are mirrored on the mirror port.
Frames received are not mirrored.
Disabled: neither frames transmitted nor frames received are mirrored.
Enabled: Frames received and frames transmitted are mirrored on the mirror
port.
Buttons
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
415