Chapter 6. VLAN Management
Parameter description:
IP Address:
Indicates the IP address.
Mask Length:
Indicates the network mask length.
VLAN ID:
Indicates the VLAN ID. VLAN ID can be changed for the existing entries.
Port Members:
A row of check boxes for each port is displayed for each IP subnet to VLAN
ID mapping entry. To include a port in a mapping, simply check the box. To
remove or exclude the port from the mapping, make sure the box is unchecked.
By default, no ports are members and all boxes are unchecked.
Buttons
Delete:
To delete a IP subnet-based VLAN entry, check this box and press save. The
entry will be deleted on the selected switch in the stack.
Add New Entry:
Click "Add New Entry" to add a new IP subnet-based VLAN entry. An empty
row is added to the table, and the IP subnet-based VLAN entry can be
configured as needed. Any IP address/mask can be configured for the IP
subnet-based VLAN entry. Legal values for a VLAN ID are 1 through 4095.
The IP subnet-based VLAN entry is enabled on the selected stack switch unit
when you click on "Save". The "Delete" button can be used to undo the
addition of new IP subnet-based VLANs. The maximum possible IP subnet-
based VLAN entries are limited to 128.
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
135