KVM over IP User Manual
Enable unregistered IPMCv4 traffic flooding. Unregistered IPMCv4 traffic is
so-called unknown multicast.
After selected, the unregistered multicast stream will be forwarded like normal
packets. Once you un-selected it, such stream will be discarded
IGMP SSM Range:
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and
routers run the SSM service model for the groups in the address range. Format:
(IP address/ sub mask)
Leave Proxy Enabled
Enable IGMP Leave Proxy. This feature can be used to avoid forwarding
unnecessary leave messages to the router side.
Proxy Enabled:
Enable IGMP Proxy. This feature can be used to avoid forwarding unnecessary
join and leave messages to the router side.
Port Related Configuration
Port:
It shows the physical Port index of switch.
Router Port:
Specify which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or IGMP querier.
If an aggregation member port is selected as a router port, the whole
aggregation will act as a router port.
Fast Leave:
Enable the fast leave on the port.
Throttling:
Enable to limit the number of multicast groups to which a switch port can
belong.
Profile:
Select the profile for this port. Click to preview the page which list the rules
associated with the selected profile.
212