Table of Contents
Advertisement
KVM over IP User Manual
Buttons
Auto-refresh:
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refresh:
Click to refresh the page immediately.
Port 1-52 Status:
Click the port number to view the port status individually.
Parameter description:
MAC Address & VLAN ID:
The MAC address and VLAN ID that is seen on this port. If no MAC addresses
are learned, a single row stating "No MAC addresses attached" is displayed.
State:
Indicates whether the corresponding MAC address is blocked or forwarding.
In the blocked state, it will not be allowed to transmit or receive traffic.
Time of Addition:
Shows the date and time when this MAC address was first seen on the port.
Age/Hold:
If at least one user module has decided to block this MAC address, it will stay
in the blocked state until the hold time (measured in seconds) expires. If all user
modules have decided to allow this MAC address to forward, and aging is
enabled, the Port Security module will periodically check that this MAC
address still forwards traffic. If the age period (measured in seconds) expires
and no frames have been seen, the MAC address will be removed from the
MAC table. Otherwise a new age period will begin.
If aging is disabled or a user module has decided to hold the MAC address
indefinitely, a dash (-) will be shown.
314
Advertisement
Table of Contents
