Table of Contents
Advertisement
KVM over IP User Manual
Web Interface
To display the MVR SFM Information in the web interface:
1. Click Multicast, MVR and MVR SFM Information.
2. If you want to auto-refresh the information then you need to evoke the
"Auto-refresh".
3. To click the "Refresh" to refresh an entry of the MVR Groups Information.
4. Click First/Next Page to change page.
Parameter description:
Navigating the MVR SFM Information Table
Each page shows up to 99 entries from the MVR SFM Information Table,
default being 20, selected through the "entries per page" input field. When first
visited, the web page will show the first 20 entries from the beginning of the
MVR SFM Information Table.
The "Start from VLAN", and "Group Address" input fields allow the user to
select the starting point in the MVR SFM Information Table. Clicking the
Refresh button will update the displayed table starting from that or the closest
next MVR SFM Information Table match. In addition, the two input fields will
- upon a Refresh button click - assume the value of the first displayed entry,
allowing for continuous refresh with the same start address.
The Next Page will use the last entry of the currently displayed table as a basis
for the next lookup. When the end is reached the text "No more entries" is
shown in the displayed table. Use the First Page button to start over.
242
Advertisement
Table of Contents
