Table of Contents
Advertisement
KVM over IP User Manual
Destination IP Specific Destination IP address in value/mask format or 'Any'.
IP Fragment IPv4 frame fragmented option: 'Yes', 'No' or 'Any'.
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of
values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF
or AF11-AF43.
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
IPv6:
Protocol IP protocol number: (0-255, 'TCP' or 'UDP') or 'Any'.
Source IP 32 LS bits of IPv6 source address in value/mask format or 'Any'.
Destination IP Specific Destination IP address in value/mask format or 'Any'.
DSCP Diffserv Code Point value (DSCP): It can be a specific value, range of
values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF
or AF11-AF43.
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP.
Action Parameters:
CoS Class of Service: (0-7) or 'Default'.
DPL Drop Precedence Level: (0-3) or 'Default'.
DSCP DSCP: (0-63, BE, CS1-CS7, EF or AF11-AF43) or 'Default'.
PCP PCP: (0-7) or 'Default'. Note: PCP and DEI cannot be set individually.
DEI DEI: (0-1) or 'Default'.
Policy ACL Policy number: (0-127) or 'Default' (empty field).
'Default' means that the default classified value is not modified by this QCE.
Buttons
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
Cancel:
Return to the previous page without saving the configuration change.
178
Advertisement
Table of Contents
