Table of Contents
Advertisement
KVM over IP User Manual
Web Interface
To configure a Dynamic IP Source Guard Table Configuration in the web
interface:
1. Click Security, IP Source Guard and Dynamic Table.
2. Checked "Auto-refresh".
3. Click "Refresh" to refresh the port detailed statistics.
4. Click First/Next Page to change page.
5. Specify the Start from port, VLAN, IP Address, and entries per page.
Parameter description:
Navigating the IP Source Guard Table
Each page shows up to 99 entries from the Dynamic IP Source Guard table,
default being 20, selected through the "entries per page" input field. When first
visited, the web page will show the first 20 entries from the beginning of the
Dynamic IP Source Guard Table.
The "Start from port address", "VLAN" and "IP address" input fields allow the
user to select the starting point in the Dynamic IP Source Guard Table.
Clicking "Refresh" the button will update the displayed table starting from that
or the closest next Dynamic IP Source Guard Table match. In addition, the two
input fields will - upon a "Refresh" button click - assume the value of the first
displayed entry, allowing for continuous refresh with the same start address.
The "Next Page" will use the last entry of the currently displayed table as a
298
Advertisement
Table of Contents
