KVM over IP User Manual
7. Click OK to change the PC's IP address.
8. Open a web browser on the PC and enter the factory default IP address to
access the switch's web interface. A login page appears:
Note: If you do not see the above login page, please try the following:
1. Refresh the web page.
2. Check to see if there is an IP conflict issue.
3. Clean browser cookies and temporary internet files.
4. Check your PC settings again and repeat step 2.
9. Enter the username and password. The default username is admin. A
preprogrammed password (inside the red square box below) unique to
each switch is provided on the sticker of the bottom side of the switch. An
example is shown:
10