Table of Contents
Advertisement
KVM over IP User Manual
Class 4: Max. power 30.0 W
Power Requested
The Power Requested shows the requested amount of power the PD wants to
be reserved.
Power Allocated:
The Power Allocated shows the amount of power the switch has allocated for
the PD.
Power Used:
The Power Used shows how much power the PD currently is using.
Current Used:
The Power Used shows how much current the PD currently is using.
Priority:
The Priority shows the port's priority configured by the user.
Port Status:
The Port Status shows the port's status. The status can be one of the following
values:
PoE not available - No PoE chip found - PoE not supported for the port.
PoE turned OFF - PoE disabled : PoE is disabled by user.
PoE turned OFF - Power budget exceeded - The total requested or used power
by the PDs exceeds the maximum power the Power Supply can deliver, and
port(s) with the lowest priority is/are powered down.
No PD detected - No PD detected for the port.
PoE turned OFF - PD overload - The PD has requested or used more power
than the port can deliver, and is powered down.
PoE turned OFF - PD is off.
Invalid PD - PD detected, but is not working correctly.
Buttons
Auto-refresh:
104
Advertisement
Table of Contents
