Table of Contents
Advertisement
KVM over IP User Manual
3. Specify the parameter of the ACE.
4. Click save to save the setting.
5. If you want to cancel the setting then you need to click the reset button. It
will revert to previously saved values.
6. When editing an entry on the ACE Configuration page, note that the Items
displayed depend on various selections, such as Frame Type and IP
Protocol Type. Specify the relevant criteria to be matched for this rule, and
set the actions to take when a rule is matched (such as Rate Limiter, Port
Copy, Logging, and Shutdown).
Parameter description:
ACE:
Indicates the ACE ID.
Ingress Port:
Indicates the ingress port of the ACE. Possible values are:
Any: The ACE will match any ingress port.
Policy: The ACE will match ingress ports with a specific policy.
Port: The ACE will match a specific ingress port.
Policy / Bitmask:
Indicates the policy number and bitmask of the ACE.
Frame Type:
Indicates the frame type of the ACE. Possible values are:
Any: The ACE will match any frame type.
338
Advertisement
Table of Contents
