KVM over IP User Manual
Web Interface
To display the routing information in the web interface:
1. Click System, IP Address, Status and Routing Info Base.
2. Display the Routing Base information.
Parameter description:
DHCP:
The route is created by DHCP.
Connected:
The destination network is connected directly.
Static:
The route is created by user.
OSPF:
The route is created by OSPF.
Network/Prefix:
Network and prefix (example 10.0.0.0/16) of the given route entry.
NextHop:
The IP address of nexthop. Value '0.0.0.0' indicates the link is directly
connected.
30