Table of Contents
Advertisement
Chapter 13. Access Control
MC: Frame must be multicast.
BC: Frame must be broadcast.
UC: Frame must be unicast.
Specific: If you want to filter a specific destination MAC address with this
ACE, choose this value. A field for entering a DMAC value appears.
DMAC Value:
When "Specific" is selected for the DMAC filter, you can enter a specific
destination MAC address. The legal format is "xx-xx-xx-xx-xx-xx" or
"xx.xx.xx.xx.xx.xx" or "xxxxxxxxxxxx" (x is a hexadecimal digit). A frame
that hits this ACE matches this DMAC value.
VLAN Parameters
802.1Q Tagged:
Specify whether frames can hit the action according to the 802.1Q tagged. The
allowed values are:
Any: Any value is allowed ("don't-care").
Enabled: Tagged frame only.
Disabled: Untagged frame only.
The default value is "Any".
VLAN ID Filter:
Specify the VLAN ID filter for this ACE.
Any: No VLAN ID filter is specified. (VLAN ID filter status is "don't-care".)
Specific: If you want to filter a specific VLAN ID with this ACE, choose this
value. A field for entering a VLAN ID number appears.
VLAN ID:
When "Specific" is selected for the VLAN ID filter, you can enter a specific
VLAN ID number. The allowed range is 1 to 4095. A frame that hits this ACE
matches this VLAN ID value.
Tag Priority:
Specify the tag priority for this ACE. A frame that hits this ACE matches this
tag priority. The allowed number range is 0 to 7 or range 0-1, 2-3, 4-5, 6-7, 0-
3 and 4-7. The value Any means that no tag priority is specified (tag priority is
"don't-care".)
343
Advertisement
Table of Contents
