Table of Contents
Advertisement
KVM over IP User Manual
It should be noted that LLDP-MED and the LLDP-MED Fast Start mechanism
is only intended to run on links between LLDP-MED Network Connectivity
Devices and Endpoint Devices, and as such does not apply to links between
LAN infrastructure elements, including Network Connectivity Devices, or
other types of links.
Transmit TLVs
Port:
The interface name to which the configuration applies.
Capabilities:
When checked the switch's capabilities is included in LLDP-MEDinformation
transmitted.
Policies:
When checked the configured policies for the interface is included in LLDP-
MED information transmitted.
Location:
When checked the configured location information for the switch is included
in LLDP-MED information transmitted.
PoE:
When checked the configured PoE (Power Over Ethernet) information for the
interface is included in LLDP-MED information transmitted.
Device Type:
Any LLDP-MED Device is operating as a specific type of LLDP-MED Device,
which may be either a Network Connectivity Device or a specific Class
of Endpoint Device, as defined below.
A Network Connectivity Device is a LLDP-MED Device that provides access
to the IEEE 802 based LAN infrastructure for LLDP-MED Endpoint Devices
An LLDP-MED Network Connectivity Device is a LAN access device based
on any of the following technologies :
1. LAN Switch/Router
2. IEEE 802.1 Bridge
3. IEEE 802.3 Repeater (included for historical reasons)
4. IEEE 802.11 Wireless Access Point
44
Advertisement
Table of Contents
