ATEN ES0152 User Manual page 321

Chapter 12. Security
The "Next Page" will use the last entry of the currently displayed table as a
basis for the next lookup. When the end is reached the text "No more entries"
is shown in the displayed table. Use the "First Page" button to start over.
Web Interface
To configure a Dynamic ARP Inspection Table Configuration in the web
interface:
1. Click Security, ARP Inspection and Dynamic Table.
2. Checked "Auto-refresh".
3. Click "Refresh" to refresh the port detailed statistics.
4. Click First/Next Page to change page.
5. Specify the Start from port, VLAN, MAC Address, IP Address, and
entries per page.
 Parameter description:
ARP Inspection Table Columns
Port:
Switch Port Number for which the entries are displayed.
VLAN ID:
VLAN ID in which the ARP traffic is permitted.
MAC Address:
User MAC address of the entry.
307