Table of Contents
Advertisement
KVM over IP User Manual
When "Network" is selected for the source IP filter, you can enter a specific
SIP mask in dotted decimal notation.
DIP Filter:
Specify the destination IP filter for this ACE.
Any: No destination IP filter is specified. (Destination IP filter is "don't-care".)
Host: Destination IP filter is set to Host. Specify the destination IP address in
the DIP Address field that appears.
Network: Destination IP filter is set to Network. Specify the destination IP
address and destination IP mask in the DIP Address and DIP Mask fields that
appear.
DIP Address:
When "Host" or "Network" is selected for the destination IP filter, you can
enter a specific DIP address in dotted decimal notation.
DIP Mask:
When "Network" is selected for the destination IP filter, you can enter a
specific DIP mask in dotted decimal notation.
IPv6 Parameters
The IPv6 parameters can be configured when Frame Type "IPv6" is selected.
Next Header Filter:
Specify the IPv6 next header filter for this ACE.
Any: No IPv6 next header filter is specified ("don't-care").
Specific: If you want to filter a specific IPv6 next header filter with this ACE,
choose this value. A field for entering an IPv6 next header filter appears.
ICMP: Select ICMP to filter IPv6 ICMP protocol frames. Extra fields for
defining ICMP parameters will appear. These fields are explained later in this
help file.
UDP: Select UDP to filter IPv6 UDP protocol frames. Extra fields for defining
UDP parameters will appear. These fields are explained later in this help file.
TCP: Select TCP to filter IPv6 TCP protocol frames. Extra fields for defining
TCP parameters will appear. These fields are explained later in this help file.
Next Header Value:
348
Advertisement
Table of Contents
