ATEN ES0152 User Manual page 286

KVM over IP User Manual
Web Interface
To configure Privilege Level in the web interface:
1. Click Security, Management and Privilege Levels.
2. Specify the Privilege parameter.
3. Click Apply.
 Parameter description:
Group Name:
The name identifying the privilege group. In most cases, a privilege level group
consists of a single module (e.g. LACP, STP or QoS), but a few of them
contains more than one. The following description defines these privilege level
groups in details:
System: Contact, Name, Location, Timezone, Daylight Saving Time, Log.
Privilege Levels:
Every group has an authorization Privilege level for the following sub groups:
configuration read-only, configuration/execute read-write. User Privilege
should be same or greater than the authorization Privilege level to have the
access to that group.
 Buttons
Apply:
Click to save changes.
Reset:
Click to undo any changes made locally and revert to previously saved values.
272