Table of Contents
Advertisement
KVM over IP User Manual
Frame Type:
Indicates the type of frame. Possible values are:
Any: Match any frame type.
Ethernet: Match EtherType frames.
LLC: Match (LLC) frames.
SNAP: Match (SNAP) frames.
IPv4: Match IPv4 frames.
IPv6: Match IPv6 frames.
Action:
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
Possible actions are:
CoS: Classify Class of Service.
DPL: Classify Drop Precedence Level.
DSCP: Classify DSCP value.
PCP: Classify PCP value.
DEI: Classify DEI value.
Policy: Classify ACL Policy number.
Ingress Map: Classify Ingress Map ID.
Conflict:
Displays Conflict status of QCL entries. It may happen that resources required
to add a QCE may not available, in that case it shows conflict status as 'Yes',
otherwise it is always 'No'. Please note that conflict can be resolved by
releasing the H/W resources required to add QCL entry on pressing 'Resolve
Conflict' button.
Buttons
Auto-refresh:
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
Refresh:
Click to refresh the page immediately.
Combined:
Select the QCL status from this drop down list.
180
Advertisement
Table of Contents
