Table of Contents
Advertisement
Quick Links
User Manual
ACS-1602
Read this guide thoroughly and follow the installation and operation
procedures carefully in order to prevent any damage to the unit and/or
any devices that connect to it.
This package contains:
M 1 ACS-1602 ADC KVM Switch
M 2 ADC Cables (1.8m)
M 1 User Manual
M 1 Quick Start Guide
If anything is damaged or missing, contact your dealer.
© Copyright 2003 ATEN ® International Co., Ltd.
Manual Part No. PAPE-1211-1AT
Printed in Taiwan 04/2003
All brand names and trademarks are the registered property of their respective owners.
2003-04-22
Advertisement
Table of Contents
Related Manuals for ATEN Master View ACS-1602
Summary of Contents for ATEN Master View ACS-1602
-
Page 1: User Manual
This package contains: M 1 ACS-1602 ADC KVM Switch M 2 ADC Cables (1.8m) M 1 User Manual M 1 Quick Start Guide If anything is damaged or missing, contact your dealer. - Page 2 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 3 Overview The Master View ACS-1602 ADC KVM Switch is a two port control unit that allows access to two ADC equipped Macintosh systems from a single ADC console (USB keyboard, USB mouse, and ADC display). DVI equipped PCs can also be accessed from the ADC console with the use of an ADC to DVI adapter.
- Page 4 Features M Provides control of two ADC enabled computers from a single ADC console (ADC Display, USB keyboard, USB mouse). M Supports all 15,17, 22, and 23 inch Apple Studio Displays. M Supports 19 inch analog CRT ADC monitors. M Easy to install - no software required - simply connect the ADC cables.
-
Page 5: Hardware Requirements
ADC to DVI adapter that separates out the USB and power signals (see the diagram on p. 8). Note: 1. An ADC to DVI adapter is not part of the ACS-1602 package. It must be purchased separately. -
Page 6: Front View
Components Front View: 1. Port Selection Switch Press this switch to toggle the KVM focus between the two ports. 2. Port LEDs M The On Line LED lights ORANGE to indicate that the computer connected to its corresponding port is up and running. -
Page 7: Rear View
Rear View: 1. ADC Port 2 The cable that connects to the ADC port on the computer you are designating as Computer 2 plugs in here. 2. ADC Port 1 The cable that connects to the ADC port on the computer you are designating as Computer 1 plugs in here. -
Page 8: Installation
Failure to do so will result in damage to the equipment. To set up your ACS-1602 installation, refer to the diagram below and the one on p. 8 as you do the following: 1. Plug your USB keyboard and USB mouse into the USB ports on the back of the ADC display. - Page 9 Master View ACS-1602. 3. Use the ADC cables provided with this package to connect the ACS-1602’s ADC ports to the ADC ports of the computers you are installing. Note: If your computer uses a DVI type connector, you will have to use an ADC to DVI adapter (requires separate purchase).
- Page 10 AC Power ADC-to-DVI Adapter - 8 - 2003-04-22...
-
Page 11: Port Selection
Port Selection Simply press the Port Selection switch on the ACS-1602’s top panel to toggle the KVM focus between the computers (ADC1, ADC2). The Selected LED on the top panel lights to indicate which port is active. Note: For the Mac, if any USB storage devices are attached to the ADC’s USB ports, the following warning message... -
Page 12: Powering Off
Powering Off To power off your ACS-1602 installation, do the following: 1. Turn Off the ADC display 2. Turn Off the power to the computers. Modifying the Installation If you should ever need to take down, or change components on your ACS-1602 installation, do the following: 1. -
Page 13: Troubleshooting
Because of the wide variety of mouse driver standards for the modern series of mice (the ones with the extra buttons and wheels), the ACS-1602 only supports all the extra features of the Microsoft Intellimouse. It supports the scrollwheel function of most other mice. -
Page 14: Specifications
Specifications Function Computer Connections Port Selection Push Button Switch LEDs Selected 2 Green Online 2 Orange Connectors Console 1 x ADC-35 female Computers 2 x ADC-35 female Resolution 1920 x 1200; DDC,DDC2,DDC2B Environment Operating Temperature: 0 ~ 50 Storage Temperature: -20 ~ 60 Humidity: 0 ~ 80% RH Noncondensing Housing Plastic... -
Page 15: Limited Warranty
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and specially disclaims its quality, performance, merchantability, or fitness for any particular... - Page 16 Notes - 14 - 2003-04-22...
Need help?
Do you have a question about the Master View ACS-1602 and is the answer not in the manual?
Questions and answers