Table of Contents
Advertisement
KVM over IP User Manual
Web Interface
To display the IGMP Snooping Group Information in the web interface:
1. Click Multicast, IGMP Snooping and Group Information.
2. Specify how many entries to show in one page.
3. If you want to auto-refresh the information then you need to evoke the
"Auto-refresh".
4. Click "Refresh" to refresh an entry of the IGMP Snooping Groups
Information.
5. Click First/Next Page to change page.
Parameter description:
Navigating the IGMP Group Table
Each page shows up to 99 entries from the IGMP Group table, default being
20, selected through the "entries per page" input field. When first visited, the
web page will show the first 20 entries from the beginning of the IGMP Group
Table.
The "Start from VLAN", and "group" input fields allow the user to select the
starting point in the IGMP Group Table. Clicking the Refresh button will
update the displayed table starting from that or the closest next IGMP Group
Table match. In addition, the two input fields will - upon a Refresh button click
- assume the value of the first displayed entry, allowing for continuous refresh
with the same start address.
218
Advertisement
Table of Contents
