KVM over IP User Manual
Web Interface
To configure the DSCP Translation parameters in the web interface:
1. Click Quality of Service, DSCP and DSCP Translation.
2. Scroll to set the Ingress Translate and Egress Remap Parameters.
3. Evoke to enable or disable Classify.
4. Click the apply to save the setting.
5. If you want to cancel the setting then you need to click the Reset button. It
will revert to previously saved values.
Parameter description:
DSCP:
Maximum number of supported DSCP values are 64 and valid DSCP value
ranges from 0 to 63.
Ingress:
Ingress side DSCP can be first translated to new DSCP before using the DSCP
for QoS class and DPL map.
There are two configuration parameters for DSCP Translation –
Translate: DSCP at Ingress side can be translated to any of (0-63) DSCP
values.
Classify: Click to enable Classification at Ingress side.
168