KVM over IP User Manual
Upgrade: Click it to upgrade software version.
Find Switch: When this feature is activated, the switch LED will
all lighten up and flicker for 15 seconds.
PoE Config: Click it to configure the PoE function, enable/
disable PoE Auto Checking and enable/disable PoE mode for per port.
Diagnostics: Click Diagnostic Action Icon to perform the cable
diagnostics, to exam where the broken cable is, and, check if the device
connection is alive or not by ping.
Cable Status:
Green icon: Cable is connected correctly.
Red icon: Cable is not connected correctly. User can check the
distance info (XX meters) to identify the broken cable location.
Connection:
Green icon: Device is pinged correctly.
Red icon: Device is not transmitted/receiving data correctly.
Which means it might not be pinged successfully.
444