Actual Values - ABB ACS880 Firmware Manual

552 Fieldbus control through the embedded fieldbus interface (EFB)


Actual values

The ABB Drives profile supports the use of two fieldbus actual values, ACT1 and
ACT2. The actual values are 16-bit words each containing a sign bit and a 15-bit
integer. A negative value is formed by calculating the two's complement from the
corresponding positive value.
The actual values are scaled as defined by parameters 46.01...46.04; which scaling
is in use depends on the setting of parameters
act2 type (see page 356).
Fieldbus
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
46.01 (with speed reference)
20000
46.02 (with frequency reference)
46.03 (with torque reference)
10000
46.04 (with power reference)
0 0
-(46.03) (with torque reference)
-10000
-(46.04) (with power reference)
-(46.01) (with speed reference)
-20000
-(46.02) (with frequency reference)
58.28 EFB act1 type
Drive
and 58.29 EFB