ABB ACS880 Firmware Manual page 414

414 Parameters
No. Name/Value
96.03 Access levels
active
Bit Name
0 End user
1 Service
2 Advanced programmer
3...10 Reserved
11 OEM access level 1
12 OEM access level 2
13 OEM access level 3
14 Parameter lock
15 Reserved
0000h...FFFFh
96.04 Macro select
Done
Factory
Hand/Auto
PID-CTRL
T-CTRL
Sequence control
FIELDBUS
96.05 Macro active
Factory
Hand/Auto
PID-CTRL
T-CTRL
Sequence control
FIELDBUS
96.06 Parameter restore
Done
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
Shows which access levels have been activated by pass
codes entered into parameter
This parameter is read-only.
Active access levels.
Selects the application macro. See chapter
macros (page 95) for more information.
After a selection is made, the parameter reverts automatically
to Done.
Macro selection complete; normal operation.
Factory macro (see page 96).
Hand/Auto macro (see page 98).
PID control macro (see page 100).
Torque control macro (see page 104).
Sequential control macro (see page 106).
Reserved.
Shows which application macro is currently selected. See
chapter Application macros
To change the macro, use parameter
Factory macro (see page 96).
Hand/Auto macro (see page 98).
PID control macro (see page 100).
Torque control macro (see page 104).
Sequential control macro (see page 106).
Fieldbus control macro (see page 109).
Restores the original settings of the control program, ie.
parameter default values.
Note: This parameter cannot be changed while the drive is
running.
Restoring is completed.
96.02 Pass code.
Application
(page 95) for more information.
96.04 Macro select.
Def/FbEq16
0001h
-
Done
0
1
2
3
4
5
6
Factory
1
2
3
4
5
6
Done
0