ABB ACS880 Firmware Manual page 421

No. Name/Value
96.58 Approved
checksum 3
00000000h...
FFFFFFFFh
96.59 Approved
checksum 4
00000000h...
FFFFFFFFh
96.61 User data logger
status word
Bit Name
0 Running
1 Triggered
2 Data
available
3 Configured
4...15 Reserved
0000b...1111b
96.63 User data logger
trigger
Off
On
Other [bit]
96.64 User data logger
start
Off
On
Other [bit]
96.65 Factory data logger
time level
500us
2ms
10ms
96.70 Disable adaptive
program
No
Yes
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
Approved (reference) checksum 3.
Approved checksum 3.
Approved (reference) checksum 4.
Approved checksum 4.
Provides status information on the user data logger (see page
493).
This parameter is read-only.
Description
1 = The user data logger is running. The bit is cleared after the post-trigger
time has passed.
1 = The user data logger has been triggered. The bit is cleared when the
logger is restarted.
1 = The user data logger contains data that can be read. Note that the bit is
not cleared because the data is saved to the memory unit.
1 = The user data logger has been configured. Note that the bit is not
cleared because the configuration data is saved to the memory unit.
User data logger status word.
Triggers, or selects a source that triggers, the user data
logger.
0.
1.
Source selection (see Terms and abbreviations
Starts, or selects a source that starts, the user data logger.
0.
1.
Source selection (see Terms and abbreviations
Selects the sampling interval for the factory data logger (see
page 492).
500 microseconds.
2 milliseconds.
10 milliseconds.
Enables/disables the adaptive program (if present).
See also section Adaptive programming
Adaptive program enabled.
Adaptive program disabled.
Parameters 421
Def/FbEq16
0h
-
0h
-
0000b
1 = 1
Off
0
1
on page 112). -
Off
0
1
on page 112). -
500us
500
2000
10000
No
(page 27).
0
1