ABB ACS880 Firmware Manual page 548

548 Fieldbus control through the embedded fieldbus interface (EFB)
Bit Name
8 JOGGING_1
9 JOGGING_2
10 REMOTE_
CMD
11 EXT_CTRL_
LOC
12...15 Reserved
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Value STATE/Description
1 Accelerate to jogging 1 reference.
Notes:
• Bits 4...6 must be 0.
• See also section
0 Jogging 1 disabled.
1 Accelerate to jogging 2 reference.
See notes at bit 8.
0 Jogging 2 disabled.
1 Fieldbus control enabled.
0 Control word and reference will not get through to the
drive, except for CW bits OFF1, OFF2 and OFF3.
1 Select External Control Location EXT2. Effective if the
control location is parameterized to be selected from the
fieldbus.
0 Select External Control Location EXT1. Effective if the
control location is parameterized to be selected from the
fieldbus.
Jogging (page 55).