ABB ACS880 Firmware Manual page 298

298 Parameters
No. Name/Value
35.100 DOL starter control
source
Off
On
Running
Other [bit]
35.101 DOL starter on
delay
0...42949673 s
35.102 DOL starter off
delay
0...715828 min
35.103 DOL starter
feedback source
Not selected
Selected
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
Parameters 35.100...35.106
control logic for external equipment such as a contactor-
controlled motor cooling fan.
This parameter selects the signal that starts and stops the fan.
0 = Stop
1 = Start
The output controlling the fan contactor is to be connected to
parameter 35.105, bit 1. On and off delays can be set for the
fan by 35.101 and 35.102
the fan can be connected to an input selected by 35.103; the
loss of the feedback will optionally trigger a warning or fault
(see 35.104 and 35.106).
0 (function disabled).
1.
Bit 6 of 06.16 Drive status word 1
Source selection (see Terms and abbreviations
Defines a start delay for the motor fan.
The delay timer starts when the control source selected by
parameter 35.100 switches on. After the delay, bit 1 of
switches on.
Motor fan start delay.
Defines a stop delay for the motor fan.
The delay timer starts when the control source selected by
parameter 35.100 switches off. After the delay, bit 1 of
switches off.
Motor fan stop delay.
Selects the input for motor fan feedback signal.
0 = Stopped
1 = Running
After the fan is started (bit 1 of
is expected within the time set by 35.104.
0.
1.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Digital input/output DIO1 (11.02 DIO delayed
Digital input/output DIO2 (11.02 DIO delayed
Source selection (see Terms and abbreviations
configure a monitored start/stop
respectively. A feedback signal from
(see page 130).
on page 112). -
35.105 switches on), feedback
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
status, bit 0).
status, bit 1).
on page 112). -
Def/FbEq16
Off; 06.16 b6
(95.20 b6)
0
1
2
0 s
35.105
1 = 1 s
20 min
35.105
1 = 1 min
Not selected;
DI5
(95.20 b6)
0
1
2
3
4
5
6
7
10
11