ABB ACS880 Firmware Manual page 314

314 Parameters
No. Name/Value
40.36 Set 1 output min
-32768.0 ...
32767.0
40.37 Set 1 output max
-32768.0 ...
32767.0
40.38 Set 1 output freeze
enable
Not selected
Selected
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
Defines the minimum limit for the process PID controller
output. Using the minimum and maximum limits, it is possible
to restrict the operation range.
Minimum limit for process PID controller output.
Defines the maximum limit for the process PID controller
output. See parameter 40.36 Set 1 output
Maximum limit for process PID controller output.
Freezes (or defines a source that can be used to freeze) the
output of the process PID controller, keeping the output at the
value it was before freeze was enabled. This feature can be
used when, for example, a sensor providing process feedback
must to be serviced without stopping the process.
1 = Process PID controller output frozen
See also parameter 40.30 Set 1 setpoint freeze
Process PID controller output not frozen.
Process PID controller output frozen.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Digital input/output DIO1 (11.02 DIO delayed
Digital input/output DIO2 (11.02 DIO delayed
Source selection (see Terms and abbreviations
min.
enable.
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
status, bit 0).
status, bit 1).
on page 112). -
Def/FbEq16
0.0
1 = 1
1500.0;
1800.0
(95.20 b0)
1 = 1
Not selected
0
1
2
3
4
5
6
7
10
11