ABB ACS880 Firmware Manual page 345

No. Name/Value
50.37 FBA B actual 1 type
50.38 FBA B actual 2 type
50.39 FBA B SW
transparent source
Not selected
Other
50.40 FBA B act1
transparent source
Not selected
Other
50.41 FBA B act2
transparent source
Not selected
Other
50.42 FBA B debug mode
Disable
Fast
50.43 FBA B control word
00000000h ...
FFFFFFFFh
50.44 FBA B reference 1
-2147483648 ...
2147483647
50.45 FBA B reference 2
-2147483648 ...
2147483647
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
Selects the type/source and scaling of actual value 1
transmitted to the fieldbus network through fieldbus adapter B.
See parameter 50.07 FBA A actual 1
Selects the type/source and scaling of actual value 2
transmitted to the fieldbus network through fieldbus adapter B.
See parameter 50.08 FBA A actual 2
Selects the source of the fieldbus status word when the
fieldbus adapter is set to a transparent communication profile
eg. by its configuration parameters (group
No source selected.
Source selection (see Terms and abbreviations
When parameter 50.37 FBA B actual 1 type
Transparent or General, this parameter selects the source of
actual value 1 transmitted to the fieldbus network through
fieldbus adapter B.
No source selected.
Source selection (see Terms and abbreviations
When parameter 50.38 FBA B actual 2 type
Transparent or General, this parameter selects the source of
actual value 2 transmitted to the fieldbus network through
fieldbus adapter B.
No source selected.
Source selection (see Terms and abbreviations
Enables the display of raw (unmodified) data received from
and sent to fieldbus adapter B in parameters 50.43...50.48.
This functionality should only be used for debugging.
Display of raw data from fieldbus adapter B disabled.
Display of raw data from fieldbus adapter B enabled.
Displays the raw (unmodified) control word sent by the master
(PLC) to fieldbus adapter B if debugging is enabled by
parameter 50.42 FBA B debug
This parameter is read-only.
Control word sent by master to fieldbus adapter B.
Displays raw (unmodified) reference REF1 sent by the master
(PLC) to fieldbus adapter B if debugging is enabled by
parameter 50.42 FBA B debug
This parameter is read-only.
Raw REF1 sent by master to fieldbus adapter B.
Displays raw (unmodified) reference REF2 sent by the master
(PLC) to fieldbus adapter B if debugging is enabled by
parameter 50.42 FBA B debug
This parameter is read-only.
Raw REF2 sent by master to fieldbus adapter B.
Parameters 345
type.
type.
54 FBA B settings).
on page 112). -
is set to
on page 112). -
is set to
on page 112). -
mode.
mode.
mode.
Def/FbEq16
Auto
Auto
Not selected
-
Not selected
-
Not selected
-
Disable
0
1
-
-
-
-
-
-