ABB ACS880 Firmware Manual page 301

No. Name/Value
Ambient
temperature
Other
36.07 AL2 signal scaling
0.00 ... 32767.00
36.08 Logger function
Bit Name
0 AL1
1 AL2
2...15 Reserved
0000b...0011b
36.09 Reset loggers
Done
All
PVL
AL2
36.10 PVL peak value
-32768.00 ...
32767.00
36.11 PVL peak date
-
36.12 PVL peak time
-
36.13 PVL current at peak
-32768.00 ...
32767.00 A
36.14 PVL DC voltage at
peak
0.00 ... 2000.00 V
36.15 PVL speed at peak
-32768.00 ...
32767.00 rpm
36.16 PVL reset date
-
ghv Vertriebs-GmbH | Am Schammacher Feld 47 | 85567 Grafing | Telefon + 49 80 92 81 89 0 | info@ghv.de | www.ghv.de
Description
01.70 Ambient temperature %
The amplitude range of 0...100% corresponds to 0...60 °C or
32...140 °F.
Source selection (see Terms and abbreviations
Defines the signal value that corresponds to 100% amplitude. 100.00
Signal value corresponding to 100%.
Determines whether amplitude loggers 1 and 2 are active
continuously or only when the drive is modulating.
Description
0 = Amplitude logger 1 active continuously
1 = Amplitude logger 1 active only when the drive is modulating
0 = Amplitude logger 2 active continuously
1 = Amplitude logger 2 active only when the drive is modulating
Amplitude logger activity selection.
Resets the peak value logger and/or amplitude logger 2.
(Amplitude logger 1 cannot be reset.)
Reset completed or not requested (normal operation).
Reset both the peak value logger and amplitude logger 2.
Reset the peak value logger.
Reset amplitude logger 2.
Displays the peak value recorded by the peak value logger.
Peak value.
Displays the date on which the peak value was recorded.
Peak occurrence date.
Displays the time at which the peak value was recorded.
Peak occurrence time.
Displays the motor current at the moment the peak value was
recorded.
Motor current at peak.
Displays the voltage in the intermediate DC circuit of the drive
at the moment the peak value was recorded.
DC voltage at peak.
Displays the motor speed at the moment the peak value was
recorded.
Motor speed at peak.
Displays the date on which the peak value logger was last
reset.
Last reset date of the peak value logger.
Parameters 301
(page 118).
on page 112). -
Def/FbEq16
20
1 = 1
-
1 = 1
Done
0
1
2
3
0.00
1 = 1
-
-
-
-
0.00 A
1 = 1 A
0.00 V
10 = 1 V
0.00 rpm
See par.
46.01
-
-