Parameter Listing; Actual Values - ABB ACQ80-04 Firmware Manual

Parameter listing

No. Name/Value
01

01 Actual values

01.01 Motor speed used
-30000.00...
30000.00 rpm
01.02 Motor speed
estimated
-30000.00...
30000.00 rpm
01.03 Motor speed %
-1000.00...
1000.00%
01.06 Output frequency
-500.00...500.00
Hz
01.07 Motor current
0.00...30000.00 A
01.08 Motor current % of
motor nom
0.0...1000.0%
01.09 Motor current % of
drive nom
0.0...1000.0%
01.10 Motor torque
-1600.0...1600.0%
01.11 DC voltage
0.00...2000.00 V
01.13 Output voltage
0...2000 V
Description
Basic signals for monitoring the drive.
All parameters in this group are read-only unless otherwise
noted.
Note: Values of these actual signals are filtered with the filter
time defined in group 46 Monitoring/scaling
selection lists for parameters in other groups mean the raw
value of the actual signal instead. For example, if a selection
is "Output frequency" it does not point to the value of
parameter 01.06 Output frequency
Shows estimated motor speed.
A filter time constant for this signal can be defined by
parameter 46.11 Filter time motor
Estimated motor speed.
Shows estimated motor speed in rpm.
A filter time constant for this signal can be defined by
parameter 46.11 Filter time motor
Estimated motor speed.
Shows motor speed in percent of the synchronous motor
speed.
Motor speed.
Shows estimated drive output frequency in Hz.
A filter time constant for this signal can be defined by
parameter 46.12 Filter time output
Estimated output frequency.
Shows measured (absolute) motor current in A.
Motor current.
Shows motor current (drive output current) in percent of the
nominal motor current.
Motor current.
Shows motor current (drive output current) in percent of the
nominal drive current.
Motor current.
Shows motor torque in percent of the nominal motor torque.
See also parameter 01.30 Nominal torque
A filter time constant for this signal can be defined by
parameter 46.13 Filter time motor
Motor torque.
Shows measured DC link voltage.
DC link voltage.
Shows calculated motor voltage in V AC.
Motor voltage.
Parameters 67
settings. The
but to the raw value.
speed.
speed.
frequency.
scale.
torque.
Def/FbEq16
-
1 = 1 rpm
-
1 = 1 rpm
-
10 = 1%
-
10 = 1 Hz
-
1 = 1 A
-
1 = 1%
-
1 = 1%
-
10 = 1%
-
10 = 1 V
-
1 = 1 V