Maintenance And Replacement Of Components; Scrap Treatment - INVT Goodrive 35 Series Operation Manual

Goodrive35 inverters

1.4.3 Maintenance and replacement of components


inspection, and components replacement of the inverter.

for at least the time designated on the inverter after disconnection.

Take measures to avoid screws, cables and other conductive matters to fall
into the inverter during maintenance and component replacement.
Note:

Please select proper torque to tighten screws.

Keep the inverter, parts and components away from combustible materials during maintenance
and component replacement.

Do not carry out any isolation and pressure test on the inverter and do not measure the control
circuit of the inverter by megameter.

Carry out a sound anti-electrostatic protection to the inverter and its internal components during
maintenance and component replacement.

1.4.4 Scrap treatment



Dispose of it separately at an appropriate collection point instead of placing it
in the normal waste stream.
Only qualified electricians are allowed to perform the maintenance,
Disconnect all power supplies to the inverter before the terminal wiring. Wait
There are heavy metals in the inverter. Deal with it as industrial waste.
When the life cycle ends, the product should enter the recycling system.
4
Safety Precautions