INVT Goodrive 35 Series Operation Manual page 195

Goodrive35 inverters
Function
code
P07.33 Running frequency at current fault
P07.34 Ramp reference frequency at current fault
P07.35 Output voltage at the current fault
P07.36 Output current at current fault
P07.37 Bus voltage at current fault
P07.38 The Max temperature at current fault
P07.39 Input terminals state at current fault
P07.40 Output terminals state at current fault
P07.41 Running frequency at previous fault
P07.42 Ramp reference frequency at previous fault
Name Detailed instruction of parameters
13: Input side phase loss (SPI)
14: Output side phase loss (SPO)
15: Overheat of the rectifier module
(OH1)
16: Overheat fault of the inverter module
(OH2)
17: External fault (EF)
18: 485 communication fault (CE)
19: Current detection fault (ItE)
20: Motor autotune fault (tE)
21: EEPROM operation fault (EEP)
22: PID response offline fault (PIDE)
23: Brake unit fault (bCE)
24: Running time arrival (END)
25: Electrical overload (OL3)
26: Panel communication fault (PCE)
27: Parameter uploading fault (UPE)
28: Parameter downloading fault (DNE)
29: PROFIBUS/CANOPEN
communication fault (E-DP)
30: Ethernet communication fault
(E-NET)
31: CANopen communication fault
(E-CAN)
32: Grounding short circuit fault 1 (ETH1)
33: Grounding short circuit fault 2 (ETH2)
34: Speed deviation fault (dEu)
35: Maladjustment (STu)
36: Undervoltage fault (LL)
188
Basic operation instruction
Default
value
0.00 Hz
0.00 Hz
0 V
0.0 A
0.0 V
0.0° C
0
0
0.00 Hz
0.00 Hz